MIXIF2 Interface
Yet another unique product from EZE(UK). Very often overlooked, a digital mode interface which uses a pc's printer port not a serial port. The MIXIF2 unit was developed for use with MixW data multimode software or TRLog , or any multimode software which has the ability to select the same LPT or printer port connections. It has fully isolated grounds between radio and PC. An extremely useful unit if you use the best MixW multimode software which does not tie up your serial com ports, and is a great alternative to using a USB port. If you stop using those soft wares the unit can be changed to serial com port control for universal use very easily. This is a unique interface for those who have no serial com port available, and or their usb ports are already committed.
The units features.
-
Compact size ABS case 140mm wide x 110mm deep x 35mm high
-
High quality fibre glass printed circuit board
-
Fully isolated audio in and out using datacomms quality transformers
-
All control lines are ferrite bead filtered
-
Reed relay isolated ptt switching
-
Reed relay cw key output for use with multimode softwares ( or AFSK switching )
-
A paddle key input as used by the above softwares
-
Uses only a few mA at 12V
-
Supplied with PC cable 1metre in length
-
Supplied with radio cables 1 metre in length
-
Plug in and go
Left to right the rear apron connectors are.
TX Audio. Line Out. RX Audio. Line In. PTT. CW Key Out. LPT Port. Paddle Key In
